SNMP Commands
snmp-server user
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 340
26
•auth-md5
password —
Indicates the HMAC-MD5-96 authentication level.
The user should enter a password for authentication and generation of a
DES key for privacy. (Range: 1-32 characters)
•auth-sha
password —
Indicates the HMAC-SHA-96 authentication level.
The user should enter a password for authentication and generation of a
DES key for privacy. (Range: 1-32 characters)
•auth-md5-key
md5-des-keys —
Indicates the HMAC-MD5-96
authentication level. The user should enter a concatenated hexadecimal
string of the MD5 key (MSB) and the privacy key (LSB). If authentication is
only required, 16 bytes should be entered; if authentication and privacy are
required, 32 bytes should be entered. Each byte in the hexadecimal
character string is two hexadecimal digits. Each byte can be separated by a
period or colon. (16 or 32 bytes)
•auth-sha-key
sha-des-keys
— Indicates the HMAC-SHA-96 authentication
level. The user should enter a concatenated hexadecimal string of the SHA
key (MSB) and the privacy key (LSB). If authentication is only required, 20
bytes should be entered; if authentication and privacy are required, 36
bytes should be entered. Each byte in the hexadecimal character string is
two hexadecimal digits. Each byte can be separated by a period or colon.
(20 or 36 bytes)
Default Configuration
No group entry exists.
Command Mode
Global Configuration mode
User Guidelines
If auth-md5 or auth-sha is specified, both authentication and privacy are enabled
for the user.
When a show running-config Privileged EXEC mode command is entered, a line for
this user will not be displayed. To see if this user has been added to the
configuration, type the show snmp users Privileged EXEC mode command.