IP Source Guard Commands
show ip source-guard status
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 231
16

Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the IP source guard configuration.
Console# show ip source-guard configuration
IP source guard is globally enabled
Interface State
------------ --------------
e21 Enabled
e22 Enabled
e23 Enabled
e24 Enabled
e32 Enabled
e33 Enabled
e34 Enabled
show ip source-guard status
The show ip source-guard status Privileged EXEC mode command displays the IP
source guard status.
Syntax
show ip source-guard status [mac-address

mac-address

] [ip-address
ip-address
]
[vlan
vlan-id
] [ethernet

interface

|
port-channel
port-channel-number
]