
We design equipment with the user’s safety in mind. You can avoid the potential hazards identified on this machine by fol- lowing the procedures outlined below and elsewhere in the User Guide.
WARNING: Improper installation, oper- ation, or servicing may result in equipment damage or personal injury.
This equipment should only be installed, adjust- ed, and serviced by qualified technical person- nel who are familiar with the construction, oper- ation, and potential hazards of this type of machine.
All wiring, disconnects, and fuses should be installed by qualified electrical technicians in accordance with electrical codes in your region. Always maintain a safe ground. Do not operate the equipment at power levels other than what is specified on the machine serial plate.
WARNING: Voltage hazard.
This equipment is powered by alternating cur- rent, as specified on the machine serial tag and data plate.
A properly sized conductive ground wire from the incoming power supply must be connected to the chassis ground terminal inside the electri- cal enclosure. Improper grounding can result in severe personal injury and erratic machine operation.
Always disconnect and lock out the incoming main power source before opening the electrical enclosure or performing
ATTENTION:
READ THIS SO NO
ONE GETS HURT
UGR003/0900 | INTRODUCTION |