Programming Procedures Refreshment Center Operators’ Gu ide
4800006 90 December 2004
TEST THE DISPLAY
1. Press , then press until the display shows .
2. Press to light all display segments; press to turn them off.
3. Pressing any key on the customer keypad will display that character in every segment.
4. CONTINUE.
DOWNLOAD DATA TO A PDCD
(DEX Mode Only)
1. Connect your portable data collection device (PDCD) per its operating instructions.
2. If data does not download into your PDCD upon connection, press . Data is
downloaded into your PDCD. NOTE
Depending upon the setting selected in "Set DEX Options" on page 57, data
may be cleared after the download is complete.
3. CONTINUE.
SET FREEVEND OPTIONS
1. Press until one of the following is displayed:
- Normal vending mode. No items are on freevend. A closure on the keyswitch
input causes the machine to go out of service.
- All items are on freevend. The credit display shows: . A
closure on the keyswitch causes the machine to go out of service.
- All items are freevended while there is a closure on the keyswitch input.
Normal cash sales are supported when the keyswitch input is open. If the free vend
code (see "Enter a Freevend Code" on page 55) is not 0000, the code must be
entered first.
- A closure on the keyswitch input causes only the next item to be freevended.
Coin mechanism errors are ignored. Normal cash sales are also supported.
2. If is selected, press to limit free vending to specific selections. Press
the letter of the selection you want to vend. For example, the display show s *
. Selections A and C will allow free vends.
3. CONTINUE.