Programming Procedures Refreshment Center Operators’ Gu ide
4800006 62 December 2004
5. The value of "X.XX" has two purposes:
a. It tells the machine how large a bill or coin to accept even though there is not enough
change in the coin mech to cover all possible paybacks.
For example, enter 1.00. The machine will take a dollar bill or coin even though
there is less than $1.00's worth of change. Entering 5.00 tells the machine to take a
five even though there is less than $5.00's worth of change, and so forth.
NOTE
This could cause a customer to be short-changed.
Entering 0.00 means that bills or coins will only be accepted if there is enough
change to cover them.
b. The value of "X.XX" also tells the machine how much the customer is allowed to
overbuy a product. The customer will be short-changed when an overbuy occurs.
Example:
For a value of $0.25: if there is no change in the machine and the customer inserts a
$1.00 bill. The customer can purchase a product for $0.75 even though the change
cannot be paid back. The customer will be short-changed. Normally a purch ase will
not be approved unless all change can be paid.
Entering 0.00 means that the vend will only be approved when the correct change
can be returned (overbuy disabled).
6. Press until the display shows: . The display will show
when the amount of available change in the coin mechanism falls below the
value of "X.XX". Enter a value with the number keys. For example, if is
displayed, the message is displayed when less than a dollar's worth
of change is in the coin mechanism.
7. Press until one of the following displays:
- More than one vend is allowed, with a declining balance.
- A declining balance is not allowed.
8. Press until one of the following displays:
- This means that the customer will automatically receive a refund if the vend
fails.
- This means that the customer’s credit is restored to the machine i f the vend
fails, allowing another selection to be made. Additionally, the customer can
press the coin return to receive a cash refund.
9. Press to display the desired choice.
10. CONTINUE.