Programming Procedures Refreshment Center Operators’ Gu ide
4800006 56 December 2004
ASSIGN A CODE TO VIEW DATA WITHOUT OPENING THE DOOR
(Supervisor Mode Only)
If the proper code is entered, sales data can be viewed b y machine, tr ay , or selecti on without
opening the merchandiser’s door.
1. Follow the steps in "Gain Access to The Supervisor Mode" on page 55.
2. Press , then until the display shows . The X's represent the
currently entered code. Use the number keys to enter a new code, if desired.
Usage:
From the standby message, enter the code using the customer keypad. Non-resettable
(total paid sales and total paid vends) will display. Press to scroll through the data.
3. CONTINUE.
LOCK OR UNLOCK MODE OR PAYOUT KEYS
(Supervisor Mode Only)
1. Follow the steps in "Gain Access to The Supervisor Mode" on page 55.
2. Press , then until the display shows either # or #. The
pound sign (#) is the first mode key that can be locked or unlocked. To see if another key
is locked or unlocked, press that key.
3. Press to change between locked and unlocked. When anyone other than the
supervisor tries to enter a locked mode, the display shows .
NOTE
The following mode keys cannot be locked out:
4. CONTINUE.
TURN TALKER MODE ON OR OFF
(Supervisor Mode Only)
1. Follow the steps in "Gain Access to The Supervisor Mode" on page 55.
2. Press , then until the display shows or .
3. Press to toggle between the two choices.
4. CONTINUE.
#