Refreshment Center Operators’ Guide Programming Procedures
December 2004 55 4800006
Programming Procedures GAIN ACCESS TO THE SUPERVISOR MODE
1. Press . The display shows: . You must enter the four-digit supervisor
code within 6 seconds to gain access.
NOTE
A new machine has a factory-set supervisor code of 0000.
2. When you have entered the right code, you will hear two beeps and see in the
display. After a few moments, the standby message returns.
3. You are now ready to perform various supervisor functions.
4. CONTINUE.
ENTER A NEW SUPERVISOR CODE
(Supervisor Mode Only)
1. Follow the steps in "Gain Access to The Supervisor Mode" on page 55.
2. Press , then until the display shows . The X's represent the
current supervisor code. Use the number keys to enter a new code.
IMPORTANT!
If you enter a new code, be sure to keep a written record of it. There is no
other way to access the SUPERVISOR mode.
3. CONTINUE.
ENTER A FREEVEND CODE
(Supervisor Mode Only)
1. Follow the steps in "Gain Access to The Supervisor Mode" on page 55.
2. Press , then until the display shows . The X's represent the
current freevend code. Use the number keys to enter a new code. This code is used
with the FREE WITH KEY freevend mode. If the code is anything other than "0000", it
must be entered after the key lock is turned in order to enable one free vend.
3. CONTINUE.