Refreshment Center Operators’ Guide Programming Procedures
December 2004 59 4800006
SELECT BILL VALIDATOR AND OPTIONS
1. Press , then press until one of the following choices displays:
2. Press to choose the desired option.
3. CONTINUE.
- No bills will be accepte d or there is no bill validator installed (you can ex it
the function).
- The serial bill valida tor is selected and will accept $1, $2, $5 , $10, and $20
bills. Use BILL SELECTION METHOD be low to change the bills that will
be accepted.
- A standard MDB bill va lida tor is selected. It will accept $1, $2, $5, $10
and $20 bills. Use BILL SELECTION METHO D below to change the bills
that will be accepted.
- The pulse bill valida tor w ill accept $1 bills.
*- An MDB bill validator t ha t accepts non-standard bills or tokens is
connected and operating. Press to ent e r list of bills. "Initial
Setup of a Non-Standard Bill Validator" on page 60.
BILL SELECTION
METHOD: The standard $1, $2, $5, $10, and $20 bills are ena bled by pressing the 1, 2,
5, 6, or 7 key(s), respectively. Press to select all denominati o ns, pr ess
to deselect all.