Programming Procedures Refreshment Center Operators’ Gu ide
4800006 88 December 2004
VIEW MOTOR STATUS BY TRAY
1. Press , then press until the display shows .
2. Press or the letter of the tray you want to view.
3. The display will show the status of all motors on the tray:
(If motor is present) X is the tray letter being viewed
(If motor is present and coupled to the next odd motor)
(blank) (If motor is not present and not coupled)
(If motor is coupled but not present)
(If the motor is home)
(If there is a motor error such as jammed, tray not detected or missing)
The following example is for tray C with 7 mo tors present and home with none jammed.
Motors 1 and 3 are not present, 6 and 7 are coupled, and 8 is coupled to 9 but is not
present nor home:
4. Press to run all motors on this tray.
-or-
Press to run only those motors in error.
-or-
Press a number key to run that motor only.
5. CONTINUE.
+
M
otor 0 Motor
9