Crane Merchandising Systems 480 manual Select DEX or Printer Mode, SET DEX Options

Refreshment Center Operators’ Guide Programming Procedures

SELECT DEX OR PRINTER MODE

(Supervisor Mode Only)

1.Follow the steps in "Gain Access to The Supervisor Mode" on page 55.

2. Press , then until the display shows one of the following:

			means that data will be sent directly to a printer,
			means that data remains in memory after it is downloaded into a portable
			data collection device,
			means that resettable data is cleared after it is downloaded into a portable
	DEX		data collection device.
			a special DEX option. All sales data will become non-resettable. Consult
			your DEX supplier before choosing this option.
3.	Press		to toggle through the choices. Press		to lock in the selected option.
4.	CONTINUE.
		SET DEX OPTIONS
		(Dex Mode Only)
1.	Follow the steps in "Gain Access to The Supervisor Mode" on page 55.
2.	PressPRINTER		, then	. The display shows one of two resettable bill validator totals
		ONLY
	transmitted to the DEX device:
		+CLR	- the value of bills in the stacker will be transmitted in a cash format. For
	example:ca304=n200 for two dollars. (This is the default setting.)
		NR	- the value of bills in the stacker will be transmitted in a dollar count format.
	For example: 2 for two dollars.
3.	Press		to switch between the two choices. Consult your DEX handheld supplier

for the proper settings for your machine.

NOTE

If your bill count is incorrect, the CA304 setting may be wrong. Try using the other setting.

4.	Press		until the display shows one of the following two date/time options:
		- DEX transmits the date and time of the last vend for each selection.
			- DEX will NOT transmit the date and time of the last vend for each
	selection. (This is the default setting)
5.	Press		to switch between the two choices.
6.	last.vnd.oCONTINUE..o..c.
December 2004 ffn			57	4800006