Tray Set-Up Refreshment Center Operators’ Guide
4800006 24 December 2004
Connect and Disconnect a Motor Harness
CAUTION
To avoid breaking the motor circuit bo ard, hold the hea der on the ci rcuit bo ard
whenever connecting or disconnecting a motor harness.
Disconnect a Motor Harness:
1. Pull the harness connector away from the circuit board as shown.
2. Tuck the unused part of the harness out of the way in the trough at the back of the tray.
Connect a Motor Harness:
1. Locate the harness connector for the appropriate tray position.
2. Push the harness connector over the header pins on the motor circuit board as shown.