Programming Procedures Refreshment Center Operators’ Gu ide
4800006 76 December 2004
EDIT CUSTOM MESSAGES
1. Press , and press until the display shows . X is the number of a
message (1-8). Press the number of the message you want to edit.
2. Press . The message text is displayed with the first character flashing.
3. To view the message, press . The message scrolls across the display. To stop the
scrolling, press .
4. When the character you want to change is flashing, either enter it directly, or use
and to step through the character set until the desired character is displayed.
Use the arrow keys to highlight different characters. See the section on the next page
for an explanation of special keys and the character set.
THE END OF MESSAGE CHARACTER
This is the most important character in your message, because it tells the machine when the
message is ended. If you don't use this character, your message will be followe d by a bunch
of zeros.
SHORTCUT
Instead of stepping through the whole character set to enter a letter that is
not on your keypad, enter one close to the one you want, then step to it.
Example: If you want to enter an L, first press , then press six
times. Your L should now be displayed.