Refreshment Center Operato rs’ Guide Final Installation
December 2004 47 4800006
Set Up the Coin Mechanism
If the changer is not a MARS TRC 6000, proceed to LOADING THE COIN MECHANISM
If the Changer is a MARS TRC 6000, you must set the high quarter switch.
Set the Quarter Switch:
Load the Coin Mechanism
Once you arrive at the steps that tell you how to setup your coin mechanism, please perform
the following steps:
1. Plug the power cord into the electric outlet and turn ON the main power switch.
2. Press , and press once. Press until either or
displays (depending upon which coin mech type you have).
3. If you chose in the previous step, go to step 4 and perform the rest of this
procedure. If you chose in the previous step, fill the coin tubes with coins.
Make sure the coins are not shingled. You are now finished setting up your coin mech.
Do not perform the rest of this procedure.
4. Press until the standby message is displayed, then press .
5. Insert at least 20 coins of each denomination through the coin chute. Con tinue to fill th e
coin tubes either through the coin chute or the tops of the tubes.
6. Visually check the coin tubes to make sure coins are not shingled.
7. Press .
8. If credit is still shown in the display, turn the machine power OFF, then back ON.
QUARTER SWITCH
POSITION ACTION
LOW
The coin mechanism
will only store 6
quarters. The rest are
sent to the coin box.
Fewer quarters are
available for change.
HIGH
The coin mechanism
will store 69 quarters.
More quarters are
available for change.