Final Installation Refreshment Center Operators’ Guide
4800006 46 December 2004
Install the Lock Cylinder
Install an optional lock cylinder in the
merchandiser as follows:
1. Position the lift handle lock lever
as shown.
2. Depress the lock spring at the
square hole of the lock cylinder
receptacle and pull the lock
springs out through the front.
3. Position the lock cylinder as
shown. Depress the spring
loaded lock pin.
4. Push the cylinder into the cylinder
receptacle in the lever. The pin
should snap into the square hole.
5. If the cylinder pin does not seat in the square hole, press against both ends of the lock
cylinder. Rotate the cylinder until the pin snaps into place.
6. Leave the door open and test the lock mechanism with a key. Do not close the door
until you are certain the key will unlock the lock.
Install the Optional Cash Box Lock
Remove the cash box from the merchandiser.
1. Assemble the lock as shown in the illustration
to the right.
2. Return the cash box to the merchandiser.
LOCK
SPRING
KEY
LOCK
CYLINDER
LEVER
SQUAR
E
HOLE
LOCK BAR
SCREW
NUT
WASHER
LOCK
CYLINDER