Tray Set-Up Refreshment Center Operators’ Guide
4800006 28 December 2004
Install a GearUse a Gear when:
• Gears are used to mechanically couple the spirals together.
• This happens whenever you have two spirals and only one motor for vending a
selection.
Position the Gear
• Place the gear in between the back of the tray and the spiral coupler.
• There are two possible orientations for the gear:
• There are two rules to follow when orienting gears:
RULE 1 The gears for selections next to each other cannot use the same
orientation.
RULE 2 All gears for a single selection must use the same orientation.
BACK WALL
OF TRAY
GEAR