Crane Merchandising Systems 480 - page 80

Refreshment Center Operators’ Guide Programming Procedures
December 2004 75 4800006
SELECT AN OUT-OF-SERVICE MESSAGE
1. Press , then press until the display shows "XX" represents the
current message number selected to display when the machine is out-of-service. Two
dashes mean that the factory-set message is selected.
2. To select a message, just press the corresponding number (1 through 8). To display the
factory-set message, press 0.
3. The selected message (except the factory-set message) can be edited. To do this,
press and follow the procedure given in "Edit Custom Messages" on page 76.
4. CONTINUE.
SELECT A FREEVEND MESSAGE
1. Press , then press until the display shows "XX" represents the
current message number selected for the message that displays when the machine is in
the freevend mode. Two dashes mean that the factory-set message is selected.
2. To select a message, just press the corresponding number (1 through 8). To display the
factory-set message, press 0.
3. The selected message (except the factory-set message) can be edited. To do this,
press and follow the procedure given in "Edit Custom Messages" on page 76.
4. CONTINUE.