Refreshment Center Operators’ Guide Tray Set-Up
December 2004 21 4800006
Remove a Bottle Tray
1. Remove all product from the tray.
2. Push down on the tray latches with your thumbs and slide out the tray as far as it will go.
3. Unplug the tray wiring harness from the PC board mounted on the tray guide rail
IMMEDIATELY ABOVE the tray you are removing.
4. Locate a small lever on each side of the tray, where it attaches to the slid e. The left lever
will be up, the right will be down. Press down on the left lever and up on the right lever.
5. Pull the tray towards you, off of the slides.
6. Replace the tray by performing the above steps in reverse order.
NOTE:
It is much easier to replace a bottle tray if you have assistance lining up the
tray rails and slides.