Refreshment Center Operators’ Guide Tray Set-Up
December 2004 17 4800006
Section 3: Tray Set-Up

Place a Tray in the Loading Position

1. Place both hands on the tray as shown.
2. Push down on the tray latches with your thumbs.
3a. Bottle Trays: Pull the tray toward you until the slides are fully extended. The bottle tray
can now be loaded--bottle trays do not tilt like snack and candy trays.
3b. Snack and Candy Trays: Pull the tray toward you until you hear and feel the rear tray
rollers drop into a cut-out in the top of the guide rail.
4. Continue pulling the tray forward for another inch. You will then be able to tilt the tray
downward into the loading position as shown.The candy or snack tray is now ready for
loading.
SNACK OR CANDY TRAY IN THE LOADING POSITION
NOTE
When the cabinet door is not fully open, the bottom tray will rest on the delivery pan
assembly. Handle the tray with care to avoid scratching the delivery pan assembly.
PULL
TRAY
LATCH
TRAY
LATCH
157P0011