Refreshment Center Operators’ Guide Programming Procedures
December 2004 61 4800006
SELECT MONETARY OPTIONS
This function lets you:
Set declining balance,
Set currency acceptance on low change,
Set overbuy options,
Set last bill stacking options
1. Press , then press until the display shows .
X.XX represents the largest denomination coin or bill that will be changed without a
purchase. Any non-zero value here will return all escrowed coins. (Each coin
denomination for which the coin mech has a tube is called an ESCROWED coin
because it can be returned.) When the coin return button is pressed, all coins inserted
will be returned provided there is a coin mech tube for each of those coins, EXCEPT in
the forced vend mode.
Some examples:
- Forced vend; NO change returned without a purchase.
- Returns change without purchase if all accepted coins are less than .25
denomination or have a payout tube. Acceptance of a dollar coin will not cause a Force
Vend if the coin mechanism has a dollar coin p ayou t tube. Other wise , accep ting a d oll ar
coin or accepting and stacking a dollar bill will cause a Force Vend.
- Bills and non-escrowed coins less than or equal to $1.00 will be changed
without purchase. All escrowed coins are returned.
2. Press to display the desired choice.
3. Press until one of the following displays:
< -Accept any bill of value $X.XX or less. Hold the last bill that meets or
exceeds maximum price in escrow.
OR
-Accept any bill of value $X.XX or less. Immediately stack the last bill.
Example: If setting is and maximum price is $1.50. This setting will
immediately stack the second $1.00 bill inserted.
4. Press to display the desired choice.
Once credit is established, multiple
vends may occur until the coin return is
pressed.
DECLINING
BALANCE: