Programming Procedures Refreshment Center Operators’ Gu ide
4800006 74 December 2004
8. Press . The display shows *. The dashes represent the trays affected
by this time interval. Press the appropriate letter key to enable a tray, press the key
again to disable it. For example, pressing A, C, and E will cause the display to look like
this: , meaning that all A, C, and E selections are affected by this interval.
Press to turn on all levels; press to turn all levels off.
9. Press . The display shows or "OFF" means there is no
custom message selected, and "X" represents the custom message number set for this
interval. Press the number key of the message (1 through 8) you want displayed. To
edit this message, press and follow the procedure given in "Edit Custom
Messages" on page 76. Press 0 to turn the message OFF for this time interval.
10. CONTINUE.
SELECT A STANDBY MESSAGE
The standby message is displayed during normal vending periods w he re the re are no o ut of
service faults on the machine.
1. Press , then press until the display shows "XX" represents the
current message number selected for the standby message. Two dashes mean that the
factory-set message is selected.
2. To select a message, just press the corresponding number (1 through 8). To display the
factory-set message, press 0.
3. The selected message (except the factory-set message) can be edited. To do this,
press and follow the procedure given in "Edit Custom Messages" on page 76.
4. CONTINUE.