Crane Merchandising Systems 670, 678 manual RINSING is, Rinse The Brewer, Fill The Tank

HOT DRINK SETUP/PROGRAMMING GUIDE

RINSE THE BREWER

WARNING

Very hot water will be dispensed in this test. Com- ing into contact with hot water will HURT!

1.	Press	, then press	until the display shows
	BREW	RINSE.
2.	Press	to rinse the brewer. The brewer cycles, and
RINSING is		displayed.
3.	CONTINUE.
	FILL THE TANK
1.	Press	, then press	until the display shows
TANK.FILL.
2.	Press	. This clears any tank error and starts filling the

tank, if necessary.

NOTE

If it is taking a long time to fill the tank AND THERE ARE NO LEAKS, you may see TANK ERR in the diagnostic list again.

Just press again after making sure there are no

other problems, such as a restriction in the water inlet line or a clogged water filter.

3.CONTINUE.

November, 2002 Page - 90 6700001