Crane Merchandising Systems 678, 670 manual Hot Drink Setup/Programming Guide, Load Cups

HOT DRINK SETUP/PROGRAMMING GUIDE

9. Load Cups:

CAUTION

Use only cups which have been designed for use in a hot beverage vending machine.

a.Support the cup mechanism in the upright position.

b.Push the latch forward to release the cup mechanism. Continue to support the cup mechanism while you lower it into the loading position.

c.Remove the turret cover.

OBSERVE PROPER HYGIENE - DO NOT TOUCH THE CUPS!

d.Open the bottom of the wrapper on a stack of cups.

e.Insert the wrapped cups into the turret and pull the wrapper out.

DO NOT FILL CUPS ABOVE THE LEVEL MARKED ON THE OUTSIDE OF THE CUP TURRETS OR ABOVE THE “FILL LINE” LABEL INSIDE EACH TURRET, OR MOTOR JAMS WILL OC- CUR. USE ONLY THE SAME SIZE AND BRAND OF HOT DRINK CUPS IN EACH TURRET; DO NOT INTERMIX!

f.Replace the turret cover afrter theturrets have benn loaded.

g.Be sure the cup mechanism is locked into the upright position.

6700001 Page - 15 November, 2002