Crane Merchandising Systems 678, 670 manual screen. NOTE This is the actual machine type, action

	HOT DRINK SETUP/PROGRAMMING GUIDE
KEYSWITCH	The keyswitch input is active and configured as
	an inhibit.
MACH.TYPE 0	Machine type error displays machine type
	screen. NOTE: This is the actual machine type
	screen. You may enter the correct machine type
	number directly on this screen without further
	action.
D+J+WXYZ	Configuration error; displays the machine
	configuration screen. NOTE: this is the actual
	config screen. You may enter the correct config
	number directly on this screen without further
	action.(Verify cup size and product times in the
	product configuration	screen).
TANK ERR	Tank failed to fill or refill.
RING 1, 2	The cup ring is jammed.
MTR 1A1B2X	Cup turrets are jammed.
NO CUPS 1, 2	Out of cups.
BREW JAM	The brewer is jammed.
WASTE PAIL	The waste pail is full.
LOW WATER	The water level in the tank is low.
COLD WATER	Water in the tank is too cold to vend.
NO SENSOR	Temperature sensor failed or missing.
NO FLOAT	Float sensor failed or missing.
WHIP 1 2 3 4 5	Whipper motor failure (motor 1, 2, 3, 4,
	5)
DOOR JAM	The automatic delivery door is jammed.
NO MECH	Coin mech not detected - machine will
	not operate if configured for coin mech

6700001 Page - 95 November, 2002