Crane Merchandising Systems 670 View Amount In Validator Not Shown If Zero, Press and hold, Xx.Xx

HOT DRINK SETUP/PROGRAMMING GUIDE

VIEW AMOUNT IN VALIDATOR (NOT SHOWN IF ZERO)

1. Press , then press until the display shows

DBV	XX.XX.
"XX.XX" is the dollar amount in the bill stacker.
2. Press		to show the quantities of bills in the stacker. For

example, the display shows $0120, meaning that there are 20 dol-

lar bills in the bill stacker. Press		again to show the quantities
of other bills, such as $5s, $10s, or $20s.
3. CONTINUE.
VIEW DIAGNOSTIC MESSAGES
Press	. The display shows any of the following diagnostic
messages, depending upon any fault(s) present:
NO ERRORS	None of the following errors are detected:
KEYPAD XY	Key(s) x, y stuck.
ROM ERROR	Key(s) x, y stuck.
RAM ERROR	RAM is not initialized or is not compatible with
	the currently loaded software. If this message
	appears, initialize your RAM by performing the
	following procedure:

NOTE:

Initializing RAM will erase all your data and drink settings.

Be sure you have written this information down before continuing.

Press and hold until two beeps are heard, and the display

shows FINISHED.

November, 2002 Page - 94 6700001