Crane Merchandising Systems 678, 670 manual Appendix C. Dex/Ucs Interface Operation, On =, Off =

HOT DRINK SETUP/PROGRAMMING GUIDE

APPENDIX C. DEX/UCS INTERFACE OPERATION

Connect your portable data collection device (PDCD) to the harness hanging inside the monetary door, and operate it per its instructions.

SELECT DATA TRANSFER METHOD:

1.Press . The display shows: ENTER CODE . You must enter the four- digit supervisor code within 6 seconds to gain access.

NOTE

A new machine has a factory-set supervisor code of 0000.

When you have entered the right code, you will hear two beeps and see SUPERVISOR in the display.

2.Press until the display shows DEX.CLR ON or DEX.CLR OFF.

	DEX.CLR	ON =	Data will be cleared after collection is complete.
	DEX.CLR	OFF =	Data will remain in merchandiser memory after collec-
		tion is complete.
3.	Press	to switch between the two options.
4.	Press	to exit.

This procedure does not need to be repeated unless you desire to change the data transfer option. However, it might be prudent to check the setting prior to download to ensure unintentional clearing of data.

DOWNLOAD DATA:

1. Press . The display shows DEX.MODE while data is being transferred.

APPENDIX C. DEX/UCS INTERFACE OPERATION

6700001 Page - C7 November, 2002