Crane Merchandising Systems 670, 678 manual Set Up A Hot Drink, Hot Drink Setup/Programming Guide

HOT DRINK SETUP/PROGRAMMING GUIDE

To vend a cup only, press 1, 2, 3 (large size) or 2, 3 (regular size).

8. Continue

SET UP A HOT DRINK

Be sure that the cup sizes you set in (setup cup sizes page, ), agree with the cup sizes actually in your machine. All procedures for setting up the hot drinks are similar, so this example will demonstrate how to set up the A selection, regular size fresh brew coffee.

1. Press , then press until the display shows SETUP - *.

The star (*) represents the selection (A, B, etc.). The dash (-) represents the size of the selection.

2.Press A. (If you were setting up the A selection for the large size drink, you would press 1 first, then A.) The display shows WAT. A 12.00. This means that the currently set water throw time for the A selection is 12.00 seconds. Enter a new time if desired.

3. Press . The display shows DRY. A .60. This means that the

currently set dry product throw time for the A selection is .60 seconds. Enter a new time if desired.

4. Pressing after each display will cause the following screens to

appear:

DRY. A+ View and change the settings for an extra strong drink SUG. A View and change the settings for the sugar throw time SUG. A+ View and change the settings for extra sugar throw time LIT. A View and change the settings for the lightener throw time LIT. A+ View and change the settings for extra lightener throw time SUB. A View and change the settings for the sugar sub throw time SUB. A+ View and change the settings for extra sugar sub throw time STP. A View and change the steep time

STP. A+ View and change the steep time for an extra strong drink AIR. A View and change the air compressor/pump running time DLY. A View and change the amount of time after the vend to open

the auto vend door

November, 2002 Page - 42 6700001