Crane Merchandising Systems 678, 670 manual Set The Ratio Of Chocolate In Cappuccino

RATIO XX

HOT DRINK SETUP/PROGRAMMING GUIDE

SET THE RATIO OF CHOCOLATE IN CAPPUCCINO

1. Press , then press until the display shows either:

"XX" is the percentage of chocolate contained in a cappuccino drink or RATIO OFF No ratio is selected.

2. Press

to switch between these two displays. To change

the value of RATIO XX, enter the numbers directly. This is a quick way to set up your cappuccino drinks. See table D2 to see the actu- al throw times/amounts for certain preset ratios. You can set a ratio close to your taste, turn ratio OFF, then alter the product throw.

NOTE

Leaving this step with RATIO OFF displayed does not alter any previous settings for E and I selections. Leaving this step with a ratio set will alter those settings. The ratio automatically selects the times for water and dry product throw. The E and I selections no longer appear in the displays for those steps. If you desire greater control over your cappuccino drinks, leave ratio OFF.

3. CONTINUE.

SET THE BREWER RINSE TIME INTERVAL

1. Press , then press until the display shows SAN.TIM

X.X. "X.X" represents the time of day (in hours and tenths of hours) the machine rinses the brewer. For example, SAN.TIM 4.5 means that brewer rinse takes place at 4:30 am. Use the number keys to enter a new time, if desired. Range: 0.0 - 23.9 in .1 hour (6 minutes) increments.

2. Press . The display shows SAN.HRS X.X. "X.X" repre-

sents how soon the machine rinses the brewer after the last brewed selection. For example, SAN.HRS 2.5 means brewer rinse takes place 2.5 hours after the last vend. Use the number keys to enter a new time, if desired. Range: 2.0 - 12.5 hours, in .1 hour (6 minutes) increments.

3. CONTINUE.

6700001 Page - 47 November, 2002