Crane Merchandising Systems 678 Hot Drink Setup/Programming Guide, Load the Optional Filter Paper

HOT DRINK SETUP/PROGRAMMING GUIDE

4. Load the Optional Filter Paper:

a.Be sure the main power switch is in the OFF position.

b.Remove the cup station and grounds bucket.

c.Remove the paper holder cover by turning the fastener a quarter turn to the left.

d.Insert a roll of paper into the paper holder. Route the free end of the paper to the brewer as shown.

e.Replace the cover on the paper holder. Secure it by turning the fastener a quarter turn to the right.

f.Feed paper over swing arm assembly and underneath pinion gear shaft.

TO BREWER

PAPER

HOLDER PAPER

ROLL

COVER

FASTENER

g.Feed paper through the paper guides.

h.Raise the basket housing assembly and feed paper over the lip of the paper mechanism housing.

PAPER	PINION GEAR SHAFT
GUIDES

BASKET HOUSING

ASSEMBLY

SWING ARM

ASSEMBLY

LIP OF PAPER MECHANISM HOUSING

PAPER MECHANISM HOUSING

NOTE

It may be necessary to reach underneath the brewer between the paper mechanism housing and swing arm assembly to push paper over the lip of the paper mechanism housing.

(CONTINUED)

6700001 Page - 9 November, 2002