Crane Merchandising Systems 678, 670 manual European Cappuccino Recipe, Set Up Your Selection

HOT DRINK SETUP/PROGRAMMING GUIDE

SET UP YOUR SELECTION:

Follow the instructions in the PRODUCT CONFIGURATION section of the Hot DRINK Operator's Guide.

1.Make sure the machine is configured to use 12 oz. cups.

2.Set up the 1D selection as follows:

a.Coffee: 17 grams

b.Sugar: 2.5 grams

c.Lightener: 5 grams

d.Water: 6 ounces (about 177 ml)

e.Steep time: 12.5 seconds

f.Whip: ON +

To get these measurements, refer to PRODUCT CONFIGURATION. See COLLECTING DRY PRODUCT GRAM THROWS, and perform test throws of the dry ingredients. See COLLECTING WATER THROWS, and perform test water throws.

EUROPEAN CAPPUCCINO

First, a portion of cappuccino topping mix (or lightener) is dispensed, then layered on top is a small serving of strong coffee.

1.Replace product in the soup (or international coffee) canister with the lightener or cappuccino topping mix.

2. Enter the Supervisor code: Press . The display shows:

ENTER CODE. You must enter the four-digit supervisor code within 6 seconds to gain access.

NOTE

Anew machine has a factory-set supervisor code of 0000.

When you have entered the right code, you will hear two beeps

and see SUPERVISOR in the display. Press .

3. Reconfigure the machine:

EUROPEAN CAPPUCCINO RECIPE

6700001 Page - 65 November, 2002