Crane Merchandising Systems 670, 678 Hot Drink Setup/Programming Guide, Set Up the Menu Assembly

HOT DRINK SETUP/PROGRAMMING GUIDE

6. Set Up the Menu Assembly.

1.From the inside of the door, remove the two screws as indicated, and remove the end cap as shown.

2.Loosen the remaining 10 screws as indicated 1/2 turn. Do not loosen the screws any more than necessary to avoid stripping out the menu frame.

3.Remove the menu board. If it is still held too tightly, repeat step 2.

4.Set up the menu board as desired and reinstall it in the reverse order of disassembly.

REMOVE THE MENU BOARD

END CAP AND SLIDE OUT THE

MENU BOARD.

LOOSEN

THESE

SCREWS

REMOVE

THESE

SCREWS

LOOSEN

THESE

SCREWS

November, 2002 Page - 22 6700001