Crane Merchandising Systems 678, 670 manual Hot Drink Setup/Programming Guide

HOT DRINK SETUP/PROGRAMMING GUIDE

e.The following figure shows a coin mechanism, bill validator, and card reader connected to one another via an MDB. Some monetary configurations may not include all of these devices. Connect your coin mechanism as shown:

f. Turn ON the main power switch. Select MDB MECH in the SELECT COIN

MECHANISM AND OPTIONS procedure on page 2-11. Press

until the

standby message is displayed, then press . Insert enough coins through

the coin slot into the coin tubes to more than cover the empty sensor. Insert coins one at a time and ensure they lay flat in the tubes. The amount of coins you insert is internally recorded.

g.Payout about 6 coins to ensure proper loading.

h.Finish inserting coins through the coin slot to fill all the tubes with coins.

i.Visually check the coin tubes to make sure coins are not shingled.

6700001 Page - 13 November, 2002