Front and back view of the DFL-500 NPG

Initial configuration

When the DFL-500 NPG is first powered on, it is running in NAT/Route mode and has the basic configuration listed in DFL-500 NPG initial power on settings.

DFL-500 NPG initial power on settings

 

 

 

 

 

 

 

 

 

 

 

 

 

Operating mode:

 

 

 

 

 

NAT/Route

 

 

 

 

 

 

 

 

 

Administrator account:

 

 

 

User name:

 

admin

 

 

 

 

 

 

 

 

 

 

 

 

 

Password:

 

(none)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Internal interface:

 

 

 

IP:

 

192.168.1.99

 

 

 

 

 

 

 

 

 

 

 

Netmask:

 

255.255.255.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IP:

 

192.168.100.99

 

 

 

 

 

 

 

 

 

 

Netmask:

 

255.255.255.0

External interface:

 

Manual:

 

 

 

 

Default Gateway:

 

192.168.100.1

 

 

 

 

 

 

 

 

 

 

Primary DNS Server:

 

207.194.200.1

 

 

 

 

 

 

 

 

 

 

Secondary DNS Server:

 

207.194.200.129

 

 

 

 

 

 

 

 

 

Connecting to the web-based manager

The web-based manager is the primary tool for installing and configuring your DFL-500 NPG. Configuration changes made with the web-based manager are effective immediately without the need to reset the firewall or interrupt service.

To connect to the web-based manager you need:

a computer with an ethernet connection,

Internet Explorer version 4.0 or higher,

a crossover cable or an ethernet hub and two ethernet cables. To connect to the web-based manager:

Set the IP address of the computer with an ethernet connection to the static IP address 192.168.1.2 and a netmask of 255.255.255.0.

DFL-500 User Manual

12

 

Page 12
Image 12
D-Link DFL-500 user manual Initial configuration, Connecting to the web-based manager