Dell 1950 owner manual Interrupt controller failure See Getting Help on

Table 1-7. LCD Status Messages (continued)

Code	Text	Causes	Corrective Actions
E2016	Int Controller	Interrupt controller failure.	See "Getting Help" on page 125.
E2017	Timer Fail	Timer refresh failure.	See "Getting Help" on page 125.
E2018	Prog Timer	Programmable interval timer error.	See "Getting Help" on page 125.
E2019	Parity Error	Parity error.	See "Getting Help" on page 125.
E201A	SIO Err	SIO failure.	See "Getting Help" on page 125.
E201B	Kybd Controller	Keyboard controller failure.	See "Getting Help" on page 125.
E201C	SMI Init	System management interrupt	See "Getting Help" on page 125.
		(SMI) initialization failure.
E201D	Shutdown Test	BIOS shutdown test failure.	See "Getting Help" on page 125.
E201E	POST Mem Test	BIOS POST memory test failure.	See "Troubleshooting System
			Memory" on page 102. If the

problem persists, see "Getting Help" on page 125.

E201F	DRAC Config	Dell remote access controller
		(DRAC) configuration failure.

Check for specific error messages.

Ensure that DRAC cables and connectors are properly seated. If the problem persists, see your DRAC documentation.

E2020	CPU Config	CPU configuration failure.	Check for specific error messages.
E2021	Memory	Incorrect memory configuration.	Check for specific error messages.
	Population	Memory population order	See "Troubleshooting System
		incorrect.	Memory" on page 102.
E2022	POST Fail	General failure after video.	Check for specific error messages.
E2110	MBE Crd # DIMM ##	One of the DIMMs in the set	See "Troubleshooting System
	& ##	implicated by "## & ##" has had a	Memory" on page 102.
		memory multi-bit error (MBE). If
		no memory card is present, the
		"Crd #" string is left out of the
		message.

22

About Your System