Figure 3-4. Removing and Installing a Cooling Fan
2 | 3 |
|
1 
4
5
1 | cooling fan modules (4) | 2 | fan module handles | 3 | module wire harness |
4 | cooling fan module connector | 5 | system board cooling shroud |
|
|
Replacing a Cooling Fan Module
NOTE: The procedure for installing each individual fan is the same.
1Ensure that the fan handle is upright and lower the fan into its retention base until the fan is fully seated. Then lower the fan handle until it snaps into place. See Figure
2Attach the fan module connectors.
3If you removed the memory cooling shroud to access the fan modules, replace the shroud. See "Replacing the Memory Cooling Shroud" on page 53.
4Close the system. See "Opening and Closing the System" on page 46.
Installing System Components
49
