4Lift up on the latch on top of the system to guide it back and into an offset position. See Figure
5Grasp the cover on both sides and carefully lift the cover away from the system.
Figure 3-3. Removing the Cover
1
2
3
|
|
|
|
| 4 |
1 | latch | 2 | latch release lock | 3 | alignment J hooks |
4 | chassis tabs |
|
|
|
|
Closing the System
1Lift up the latch on the cover.
2Place the cover on top of the system and offset the cover slightly back so that it clears the chassis J hooks and lays flat on the system chassis. See Figure
3Lower the cover into the closed position aligning it with the J hooks and push down on the latch to guide the cover into place.
4Rotate the latch release lock in a clockwise direction to secure the cover.
Installing System Components
47
