Dell 1950 owner manual System Bios has disabled See Troubleshooting System

Table 1-7. LCD Status Messages (continued)

Code	Text	Causes	Corrective Actions
E2111	SBE Log Disable	The system BIOS has disabled	See "Troubleshooting System
	Crd # DIMM ##	memory single-bit error (SBE)	Memory" on page 102.
		logging, and will not resume
		logging further SBEs until the
		system is rebooted. "##" represents
		the DIMM implicated by the
		BIOS. If no memory riser card is
		present, the "Crd #" string is left
		out of the message.
E2112	Mem Spare Crd #	The system BIOS has spared the	See "Troubleshooting System
	DIMM ##	memory because it has determined	Memory" on page 102.
		that the memory had too many
		errors. "## & ##" represents the
		DIMM pair implicated by the
		BIOS. If no memory card is
		present, the "Crd #" string is left
		out of the message.
E2113	Mem Mirror Crd #	The system BIOS has disabled	See "Troubleshooting System
	DIMM ## & ##	memory mirroring because it has	Memory" on page 102.
		determined that one half of the
		mirror has had too many errors.
		"## & ##" represents the DIMM
		pair implicated by the BIOS. If no
		memory card is present, the "Crd
		#" string is left out of the message.
E2118	Fatal NB Mem CRC	One of the connections in the FBD	See "Troubleshooting System
		memory subsystem link on the	Memory" on page 102.
		Northbound side has failed.
E2119	Fatal SB Mem CRC	One of the connections in the FBD	See "Troubleshooting System
		memory subsystem link on the	Memory" on page 102.
		Southbound side has failed.
I1910	Intrusion	System cover has been removed.	Information only.
I1911	>3 ERRs Chk Log	LCD overflow message.	Check the SEL for details on the
		A maximum of three error	events.

messages can display sequentially on the LCD. The fourth message displays as the standard overflow message.

About Your System

23