Dell 1950 owner manual Removing an Expansion Card

bInsert the card-edge connector firmly into the expansion-card connector until the card is fully seated.

cWhen the card is seated in the connector, close the expansion-card latch. See Figure 3-12.

Figure 3-12. Installing an Expansion Card

3

2

1

	5
		4
1	PCI riser	2	expansion-card connector	3	expansion-card latch
4	expansion card	5	card-edge connector

6Connect any cables to the expansion card.

See the documentation that came with the card for information about its cable connections.

7Close the system. See "Opening and Closing the System" on page 46.

Removing an Expansion Card

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.

2Open the system. See "Opening and Closing the System" on page 46.

3Disconnect all cables from the card.

62

Installing System Components