6
Jumpers and Connectors
This section provides specific information about the system jumpers. It also provides some basic information on jumpers and switches and describes the connectors on the various boards in the system.
System Board Jumpers
Figure 6-1 shows the location of the configuration jumpers on the system board. Table 6-1 lists the jumper settings.
NOTE: To access the jumpers, remove the system board cooling shroud by lifting the release latch and sliding the shroud towards the front of the system. See Figure
NOTE: Lift up the memory module airflow shroud for easy access to the jumpers.
Jumpers and Connectors
