Dell 1950 owner manual Installing the System Board

14Remove the system board:

a Pull the system-board release pin. See Figure 3-26.

b While pulling the release pin, grasp the system board release handle and slide the system-board tray toward the front of the chassis.

c Lift up the system-board tray and remove it from the chassis.

Figure 3-26. System Board Removal

3

2

4

1

				5
			6
1	system-board tray release	2	system board attached to	3	system board release pin
	handle		system-board tray
4	system board cooling shroud	5	system-board securing tabs	6	system-board securing slots

Installing the System Board

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Lower the system-board tray until the tray sits flat on the bottom of the chassis.

2Ensure that all system-board securing tabs are fully inserted into the system-board securing slots. See Figure 3-26.

Installing System Components

91