Emerson Process Management 2051 manual Housing Rotation, Rosemount, Reference Manual

Reference Manual

00809-0200-4101, Rev AA July 2008

Rosemount 2051

Inline Process Connection

Housing Rotation

Do not apply torque directly to the sensor module. Rotation between the sensor module and the process connection can damage the electronics. To avoid damage, apply torque only to the hex-shaped process connection.

Sensor Module

Process Connection

The electronics housing can be rotated up to 180 degrees in either direction to improve field access, or to better view the optional LCD display. To rotate the housing, perform the following procedure:

1. Loosen the housing rotation set screw using a 5 -in. hex wrench.

------

64

2.Turn the housing left or right up to 180° from its original position. Over rotating will damage the transmitter.

3.Retighten the housing rotation set screw.

Figure 2-10. Housing Rotation

Housing Rotation Set

Screw (5/64-in.)

2-19