Emerson Process Management 2051 European Directive Information, Fieldbus Protocol, Rosemount

Rosemount 2051

Reference Manual

00809-0200-4101, Rev AA July 2008

European Directive Information

The EC declaration of conformity for all applicable European directives for this product can be found on the Rosemount website at www.rosemount.com. A hard copy may be obtained by contacting an Emerson Process Management representative.

ATEX Directive (94/9/EC)

All 2051 transmitters comply with the ATEX Directive.

European Pressure Equipment Directive (PED) (97/23/EC) 2051CG2, 3, 4, 5; 2051CD2, 3, 4, 5 (also with P9 option)

—QS Certificate of Assessment - EC No. PED-H-100 Module H Conformity Assessment

All other 2051 Pressure Transmitters

— Sound Engineering Practice

Transmitter Attachments: Diaphragm Seal - Process Flange - Manifold

— Sound Engineering Practice

Electro Magnetic Compatibility (EMC) (2004/108/EC)

All 2051 Pressure Transmitters meet all of the requirements of IEC/EN61326:2006 and NAMUR NE-21.

Ordinary Location Certification for Factory Mutual

As standard, the transmitter has been examined and tested to determine that the design meets basic electrical, mechanical, and fire protection requirements by FM, a nationally recognized testing laboratory (NRTL) as accredited by the Federal Occupational Safety and Health Administration (OSHA).

FIELDBUS PROTOCOL

Hazardous Locations Certifications

North American Certifications

FM Approvals

E5 Explosion-Proof for Class I, Division 1, Groups B, C, and D. Dust-Ignition-Proof for Class II, Division 1, Groups E, F, and G. Dust-Ignition-Proof for Class III, Division 1.

T5 (Ta = 85 °C), Factory Sealed, Enclosure Type 4X

I5/IEIntrinsically Safe for use in Class I, Division 1, Groups A, B, C, and D; Class II, Division 1, Groups E, F, and G; Class III, Division 1 when connected per Rosemount drawing 02051-1009; Non-incendive for Class I, Division 2, Groups A, B, C, and D.

Temperature Code:T4 (Ta = 40 °C), T3 (Ta = 85 °C),

Enclosure Type 4X

For input parameters see control drawing 02051-1009.

B-2