Emerson Process Management 2051 manual LCD Display, Tagging, Rosemount, Reference Manual

Rosemount 2051

Reference Manual

00809-0200-4101, Rev AA July 2008

LCD Display

Figure 2-11. LCD Display

Transmitters ordered with the LCD option are shipped with the display installed. Installing the display on an existing 2051 transmitter requires a small instrument screwdriver.

.

Jumpers (Top and Bottom)

LCD Display

Extended

Cover

Tagging	Commissioning (Paper) Tag
	When commissioning more than one device on a fieldbus segment, it can be
	difficult to identify which device is at a particular location. A removable tag
	provided with the transmitter can aid in this process by linking the Device ID
	and a physical location. TheDevice ID is a unique code that identifies a
	particular device in the absence of a device tag. The device tag is used by the
	customer as an operational identification for the device and is usually defined
	by the Piping and Instrumentation Diagram (P & ID).
	The installer should note the physical location in both places on the
	removable commissioning tag and tear off the bottom portion. This should be
	done for each device on the segment. The bottom portion of the tags can be
	used for commissioning the segment in the control system, providing a direct
	link between the Device ID and the tag location.
	COMMISSIONING TAG
	Device ID:
	0011512051010001440-121698091725
	PD Tag:

Tear Here

Device ID:

0011512051010001440-121698091725

PD Tag:

2-20