The printed image is light or faint
Darken the Density setting on the Panel menu of your printer
driver.
Your paper may be moist or damp. The higher the moisture
content in the paper, the lighter the printed output. Do not
store your paper in a humid or damp environment.
Take out the developer cartridge, shake it gently from side to
side to distribute the toner, and then reinstall it. If the problem
persists, replace the cartridge as described on page 6-28.
The Toner Save mode may be on. Turn off the Toner Save mode
using the printer driver.
The image is too dark
Lighten the Density setting on the Panel menu of your printer
driver.
If the problem persists, replace the cartridge as described on
page 6-28.
Non-printed side of th e page is dirty
Toner may have spilled in the paper feed path. Turn off
the printer. Remove the developer cartridge and the
photoconductor unit and then clean the paper path of the
printer using a clean, soft, lint-free cloth.
cCaution:
Opening the printer exposes the fuser, which is marked by a
CAUTION Hot Surface Avoid Contact label. Be careful not to
touch the fuser.
LKtwk rev.C
Reference Guide
A5 size Chapter 6
’97/12/24 DR, pass 0
6-20 Troubleshooting and Maintenance