To access the driver from Windows NT 3.51, double-click
the Control Panel icon in the Main program group, then
double-click the Printers icon. Double-click your printer
icon and select Properties from the Printers menu. Make
sure your printer is selected and click Setup.
To access the driver from Windows 95 and Windows NT
4.0, click Start, point to Settings, and click Printers. Next,
right-click the EPSON EPL-5700 icon and click Properties
(in Windows 95) or Document Defaults (in Windows NT
4.0)
Remote Control Panel Utility
Note:
Before using the Remote Control Panel Utility, be sure to read the
README file located on Remote Control Panel CD-ROM. This file
contains important information about this utility
The Remote Control Panel utility included with your printer
software allows you to adjust a number of printer settings.
You do not normally need to use the Remote Control Panel to
change printer settings. Most application programs give you
access to the printer driver, where you can change any settings
that affect the final printed output. Also, any settings you make
from your application override those made from the Remote
Control Panel.
However, if you are not able to change printer settings from
your application or if you are running DOS, the Remote
Control Panel will allow you to:
specify the size of paper loaded in the paper tray
change the dens ity and RITech s ettings
change the emul ation mode
R
Ktwk Rev.C
Reference Guide
A5 size Chapter 1
’97/12/24 DR, pass 0
Using Your Printer 1-3