7. Loosen the retaining screws securing the shield cover; then
remove the shield cover.
wWarning:
Avoid touching the electrical components that are exposed
after you remove the shield cover. They may be very hot if
the printer has been used recently.
cCaution:
Before you install the module, be sure to discharge any
static electricity by touching the printer’s shield cover.
Otherwise, you may damage static-sensitive components.
25
2
1
26
R
KTWK Rev.B
Reference Guid e
A5 size Chapter 3
’97/12/11 DR, pass 0
Options 3-9