Pen0, Pen1, Pen2, Pen3, Pen4, Pen5, Pen6
Selects the line width. You can select a value from 0.05 mm to
5.00 mm, in increments of 0.05 mm. Pen 3-6 are available only
in GLlike mode.
PS mode
Note:
This mode is available only when the EPSONScript Level 2 option is
installed.
ERR SHEET
Specifies whether the printer prints an EPSONScript error
message when an error occurs. If ERR SHEET is OFF, the error
message is displayed on the printer’s control panel but is not
printed. If ERR SHEET is ON, an error sheet is printed when
the error occurs. This feature can be convenient for
programmers using a non-bidirectiona l parallel interface.
ps2
R
Ktwk Rev.B
Reference Guide
A5 size Chapter 5
’97/12/11 DR, pass 0
Remote Control Panel Utility 5- 17