Paper Set
The paper loaded in the tray does not match the required paper
size. Replace the paper with the correct size of paper and press
Continue.
Print Overrun
The required time to process the print data exceeds the print
engine speed because the current page is too complex. Press the
control panel button to resume printing. If this message
appears again, turn on Page Protect on the Printer Setting
dialog of the Panel menu of your printer driver, or use the
Remote Control Panel to change this setting.
If you continue to receive this message when printing a
particular page, try simplifying the page by lim itin g the
number of graphics or reducing the number and size of fonts.
Lower the Print Quality setting to 300 dpi.
You can also add more memory to the printer as described in
chapter 3.
Printer Open
The printer cover is open. Close the printer cover to continue
printing.
Reset
The printer’s current interface has been reset and the buffer is
cleared. However, other interfaces are still active and retain
their settings and data.
R
Ktwk rev.C
Reference Guide
A5 size Chapter 6
’97/12/24 DR, pass 0
Troubleshooting and Maintenance 6-25