Using the ECP mode in Windows 95To use the ECP mode with a Parallel (IEEE 1284-B compliant) co nnector,
your computer must support the ECP mode.
Note:
The ECP mode is not available with Windows 3. 1, 3. 11 f or Workgroups,
Windows NT 3.51 and NT4.0.
To use the ECP mode, follow these steps:
1. Make the ECP mode settings in the BIOS setting program that com es
with your computer. (For details of the settings and the program, see
your computer’s manual.)
2. Click the Start button, point to Settings, and then click Control Panel.
3. Right-click the System icon, and click Open in the menu that appears.
4. Select the Device Manager tab.
5. Select the ECP Printer Port under Ports [COM & LPT], then click the
Properties button.
6. Select the Resources tab.
7. Make the appropriate setting in the Resource settings dialog box. (This
setting depends on your computer system. For details, see your
computer manual.)
8. Click OK to save the settings.
R
Ktwk Rev.C
A5 size Appendix A
97/12/26 pass 0