4. Remove the two screws that secure the Type-B slot cover and
remove the cover.
5. With the component side of the optional interface card facing
the outside of the printer, slide the interface card into the
grooves in the interface slot as shown below. Push it in
firmly to lock the card into place.
6. Secure the interface card with the two retaining screws.
You can verify that the interface is correctly installed by
printing a status sheet.
32
33
33-1
LKTWK Rev.B
Reference Guide
A5 size Chapter 3
’97/12/11 DR, pass 0
3-16 Options