Removing a ROM Module

1. Perform steps 1 through 7 in “Installing a memory module”
section to access the printer’s RAM slots.
2. Push the metal switch to release the ROM module.
Optional Interfaces
This section describes how to install the optional interface cards
listed below.
To add a direct connection to an Ethernet system, use an
optional Ethernet Card (C82357 /C82362 )
To add a serial or parallel interface to your printer, use one of
the following:
32KB Serial Interface Card C82307
32KB Parallel Interface Card C82310
To add a direct connection to an IBM mini or mainframe
system, use one of the following:
Coax Interface Card C82314
Twinax Interface Card C82315
The coax and twinax connectors each contain a parallel
interface. Since the printer’s built-in parallel interface remains
active, this gives you two parallel interfaces and a coax or
twinax interface. Print jobs can be sent to any connection, and
the printer automatically switches between the active ports.
LKTWK Rev.B
Reference Guide
A5 size Chapter 3
’97/12/11 DR, pass 0
3-14 Options